03 YZ450F PEGS ON A 01 KX500
Posted: Wed May 08, 2013 5:29 pm
I was playing around with my 01 KX500SM and decided the stock pegs weren't going to cut it for me.
So I started digging through my junk piles and came up with a set of aftermarket pegs off a 03 YZ450F.
Here's the results..
Here is the grinding and cutting I did.
Total fab time?
About 15 minutes...
Tools required, Sawsall, Bench grinder, vice, and vice grips to straighten out the front of the springs...
So I started digging through my junk piles and came up with a set of aftermarket pegs off a 03 YZ450F.
Here's the results..
- KX500 FOOT PEGS.JPG (50.03 KiB) Viewed 6580 times
- KX500 FOOT PEGS2.JPG (48.5 KiB) Viewed 6580 times
- KX500 FOOT PEGS3.JPG (35.74 KiB) Viewed 6580 times
- KX500 FOOT PEGS4.JPG (28.14 KiB) Viewed 6580 times
- KX500 FOOT PEGS5.JPG (42.03 KiB) Viewed 6580 times
About 15 minutes...
Tools required, Sawsall, Bench grinder, vice, and vice grips to straighten out the front of the springs...