KX Guru Racing

Does anyone know what other bikes will cross over?

Im looking for some wide, over sized pegs for 2003 KX500

IMS has several pegs for the KX500..

http://www.imsproducts.com/Products/ind ... e&tyd=true

http://www.imsproducts.com/Products/ind ... e&tyd=true

http://www.imsproducts.com/Products/ind ... e&tyd=true

http://www.imsproducts.com/Products/ind ... e&tyd=true

Just ordered these little beauties.


https://www.ebay.com/itm/SUNLINE-Stainl ... 2749.l2649

I just got a update from the member that started this thread and the pegs he bought from eBay did not fit.

If you don't mind a little grinder here and there, you can use the following pegs

Torque one sent us some killer foot pegs for a YZ450F for Sean Colliers bike "The Beast".
But they won't fit on a KX500.





So, the first thing we gotta do is remove these tubes..





Calling Mr. Sawsall..





But they still won't fit...





So into the vice for a little hand work..






Grind, grind, grind, file, file, file...
Check it often... Unless you have a mill, then just mill it to the correct thickness..






But, your still not done...

You will need to remove some more material as shown in yellow.
Go slow and do a ton of test fitting..





Then a little clean up on the buffer..

On my Supermoto I used some pegs from a 1999 - 2015 YAMAHA YZ85/YZ125/YZ250/YZ250F/YZ400F/YZ426/YZ450F





Sorry, I don't have a bunch of pics to show how I did it...
But all I used was a hand grinder and a file...

Here is some dimensions on the Yamaha Torc 1 pegs that we modded for Sean's bike.

Here is the IMS KX500 Core Enduro pegs

Here is the IMS KX500 Core MX pegs