Page 1 of 1

91 CR500 STATOR WITH LIGHTING COIL

Posted: Mon Jul 06, 2015 11:59 pm
by Sandblaster
I was parting out a 91 CR500 with a odd stator and flywheel combo.
The flywheel is FP5135.
The stator is a 9 wire.
The CDI is a 6 Wire.
Looks like someone wanted lights but none were hooked up.
If anybody knows what this combo is for sure I would appreciate a heads up.
I have a lot of flywheel information but nothing on this one...
Thanks!
flywheel and stator 1.JPG
flywheel and stator 1.JPG (118.71 KiB) Viewed 7431 times
flywheel and stator 2.JPG
flywheel and stator 2.JPG (102.76 KiB) Viewed 7431 times

Re: 91 CR500 STATOR WITH LIGHTING COIL

Posted: Tue Jul 07, 2015 8:11 pm
by Sandblaster
Stator Stator plate M18049D
On one loom

On the same connector
Green/White male bullet
Blue/White female bullet

The other loom

On the same connector
Brown male bullet
White female bullet

Blue female bullet

Yellow female bullet

******************************
CDI Wires

CDI is not 89-01 CR500
CDI is not 84-86 CR500
CDI is not any CR125 or CR250

CDI wires:

On the loom with the red sleeve:
On the same connector
White female bullet
Brown male bullet

Blue male bullet

On the same connector
Green/white male bullet
Blue/white female bullet