Post from Larry W over at kxriders My '89 flywheel (PN#F3T81171) is 21.3 OZ. (3.505 diameter).
(PN#F3T81171) is 86-88 KX500 and sometimes 89
Additional stator just for lighting
-
Sandblaster
- Posts: 6320
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: Additional stator just for lighting
Last edited by Sandblaster on Mon Jan 12, 2015 9:17 pm, edited 2 times in total.
If bikes are for kids I'll never grow up.
-
Sandblaster
- Posts: 6320
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: Additional stator just for lighting
I have a 89-91 fly wheel F4T102 at 2.6lb or 41.6 oz. diameter 4.370" approx...
I have a 92-04 fly wheel F4T107 at 2.6lb or 41.6 oz. diameter 4.370" approx...
My scale could be off a little as it only goes by .1lb increments.
I do know that there was another flywheel offered around the 89-91 that was different, possibly lighter.
Larry's F3T81171 was mostly offered from 86-88 but there were a few in 89.
I have a 92-04 fly wheel F4T107 at 2.6lb or 41.6 oz. diameter 4.370" approx...
My scale could be off a little as it only goes by .1lb increments.
I do know that there was another flywheel offered around the 89-91 that was different, possibly lighter.
Larry's F3T81171 was mostly offered from 86-88 but there were a few in 89.
If bikes are for kids I'll never grow up.