SHARKHIDE METAL PROTECTANT REVIEW BY OEM-CYCLE

If you have used a product, let us know how well it works.
Post Reply
User avatar
Sandblaster
Posts: 6316
Joined: Thu Jun 07, 2012 3:50 pm
Location: Eugene, OR
Contact:
Contact Sandblaster

Re: SHARKHIDE METAL PROTECTANT REVIEW BY OEM-CYCLE

Post by Sandblaster » Fri Apr 10, 2015 2:30 am

81cr450 wrote:Next test polish a set of cases & give it a go. :D That's holding up nicely
I would but it has no fuel resistance..
It can easily be re-applied but I'm looking for something with better fuel resistance..
If bikes are for kids I'll never grow up.
Top
User avatar
Sandblaster
Posts: 6316
Joined: Thu Jun 07, 2012 3:50 pm
Location: Eugene, OR
Contact:
Contact Sandblaster

Re: SHARKHIDE METAL PROTECTANT REVIEW BY OEM-CYCLE

Post by Sandblaster » Tue Apr 14, 2015 9:35 pm

Ok... I baked my test piece for two hours at 550f...
Passed with no problem.
I could test it with my torch to get higher temps but I don't have a accurate way to measure the temps.
If bikes are for kids I'll never grow up.
Top
Post Reply

Return to “Product Review”

Who is online

Users browsing this forum: No registered users and 2 guests