Exhaust troubles then some
Posted: Sun Jul 08, 2018 2:00 pm
smalls from KXRiders posted the following question:
So I came upon a kx500 a few years back and rode it a few times and the motor blew. So it sat on the shelf for a couple years
while i finished some other projects. I recently started getting serious and recently refreshed the motor. I decided I wanted to do a complete restore on it. However I've hit a couple roadblocks. The previous owner blended a few Honda parts into it embarassed. So I was hoping someone on this site might be able to help me out by posting a picture of the exhaust side with at least the seat, rear fender, and exhaust side plate off. More plastic off the better though.
I'm betting he needs the exhaust hooked up
But...
So I came upon a kx500 a few years back and rode it a few times and the motor blew. So it sat on the shelf for a couple years
while i finished some other projects. I recently started getting serious and recently refreshed the motor. I decided I wanted to do a complete restore on it. However I've hit a couple roadblocks. The previous owner blended a few Honda parts into it embarassed. So I was hoping someone on this site might be able to help me out by posting a picture of the exhaust side with at least the seat, rear fender, and exhaust side plate off. More plastic off the better though.
I'm betting he needs the exhaust hooked up
But...
- 20180708_065357.jpg (442.86 KiB) Viewed 5304 times
- 20180708_065405.jpg (489.85 KiB) Viewed 5304 times
- 20180708_065412.jpg (391.87 KiB) Viewed 5304 times