KTM 350 with a KX500 Engine

Bike Builds and rebuilds. Post pics and discuss your projects.
Post Reply
User avatar
Sandblaster
Posts: 5971
Joined: Thu Jun 07, 2012 3:50 pm
Location: Eugene, OR
Contact:

KTM 350 with a KX500 Engine

Post by Sandblaster » Sun Jul 23, 2017 2:42 pm

This is not my build:-)

1.Suspension: TBT Racing kyb pfs2 conversions. Valved for vet MX. Not the same forks in the photo!!!!
2. Shock: TBT racing Bladder kit and re-valved for vet MX.
3. Motor: Crank balanced and trued by CrankWorks with a Hot Rods connecting rod. Cylinder had the ports cleaned up and re-plated, head was cut as well! Every bearing, shift forks and many of the gears were replaced. The cases were media blasted and polished for that "factory" look.
4. Custom seat concepts seat
5. GPR stabilizer
6. Fasst Flex bars and foot pegs
7. TM designs slide and guide kit
8. Renthal chain, sprockets and Grips
9. Dunlop MX3S tires
10. Boyeseen Rad valve and ignition cover
11. FLO 270mm big rotor kit
12. Brand New Excel wheels with OEM hubs
13. ARC Memlon levers
14. Rekluse clutch cover with new OEM clutch
15. Scalavini hand made cone pipe
Check out http://www.dirtrider.com/kx500-ktm-350- ... east-video to see the bike in action. There is also a full story on Dirtrider.com

9x1a7293.jpg
9x1a7293.jpg (364.08 KiB) Viewed 951 times
9x1a7296_1.jpg
9x1a7296_1.jpg (170.42 KiB) Viewed 951 times
If bikes are for kids I'll never grow up.

User avatar
Sandblaster
Posts: 5971
Joined: Thu Jun 07, 2012 3:50 pm
Location: Eugene, OR
Contact:

Re: KTM 350 with a KX500 Engine

Post by Sandblaster » Sun Jul 23, 2017 2:45 pm

9x1a7306_1.jpg
9x1a7306_1.jpg (137.82 KiB) Viewed 950 times
9x1a7310.jpg
9x1a7310.jpg (114.99 KiB) Viewed 950 times
If bikes are for kids I'll never grow up.

User avatar
Sandblaster
Posts: 5971
Joined: Thu Jun 07, 2012 3:50 pm
Location: Eugene, OR
Contact:

Re: KTM 350 with a KX500 Engine

Post by Sandblaster » Sun Jul 23, 2017 2:46 pm

9x1a7323.jpg
9x1a7323.jpg (71.24 KiB) Viewed 949 times
9x1a7329.jpg
9x1a7329.jpg (78.47 KiB) Viewed 949 times
If bikes are for kids I'll never grow up.

User avatar
Sandblaster
Posts: 5971
Joined: Thu Jun 07, 2012 3:50 pm
Location: Eugene, OR
Contact:

Re: KTM 350 with a KX500 Engine

Post by Sandblaster » Sun Jul 23, 2017 2:46 pm

9x1a7350.jpg
9x1a7350.jpg (137.16 KiB) Viewed 948 times
9x1a7664.jpg
9x1a7664.jpg (116.05 KiB) Viewed 948 times
If bikes are for kids I'll never grow up.

User avatar
Sandblaster
Posts: 5971
Joined: Thu Jun 07, 2012 3:50 pm
Location: Eugene, OR
Contact:

Re: KTM 350 with a KX500 Engine

Post by Sandblaster » Sun Jul 23, 2017 2:47 pm

9x1a7738.jpg
9x1a7738.jpg (102.45 KiB) Viewed 947 times
488a6790_1.jpg
488a6790_1.jpg (169.18 KiB) Viewed 947 times
488a6801.jpg
488a6801.jpg (243.5 KiB) Viewed 947 times
If bikes are for kids I'll never grow up.

Post Reply

Return to “Bike Builds and rebuilds”

Who is online

Users browsing this forum: No registered users and 3 guests