03 YZ450F PEGS ON A 01 KX500

[Sandblaster]

I was playing around with my 01 KX500SM and decided the stock pegs weren't going to cut it for me.
So I started digging through my junk piles and came up with a set of aftermarket pegs off a 03 YZ450F.
Here's the results..

KX500 FOOT PEGS.JPG (50.03 KiB) Viewed 5750 times

KX500 FOOT PEGS2.JPG (48.5 KiB) Viewed 5750 times

KX500 FOOT PEGS3.JPG (35.74 KiB) Viewed 5750 times

KX500 FOOT PEGS4.JPG (28.14 KiB) Viewed 5750 times

Here is the grinding and cutting I did.

KX500 FOOT PEGS5.JPG (42.03 KiB) Viewed 5750 times

Total fab time?
About 15 minutes...
Tools required, Sawsall, Bench grinder, vice, and vice grips to straighten out the front of the springs...