Page 1 of 1
2 piece clutch cover
Posted: Tue Sep 12, 2017 7:53 pm
by Bong 94
My very first post.
Can you fab or convert my kx5 clutch cover? I picked up a adapter and clutch cover off eBay thinking I'll find a local welder, but no avail.
I have an auto-clutch waiting for this modification to happen. Can you help?
Re: 2 piece clutch cover
Posted: Tue Sep 12, 2017 8:29 pm
by Sandblaster
Does your auto clutch require more clearance then the stock clutch? If so, how much?
Re: 2 piece clutch cover
Posted: Wed Sep 13, 2017 9:44 pm
by Bong 94
Yes it needs more clearance. Not exactly sure on how much, but I'll assume 1/2" or as much as possible until it hits brake pedal. I have photos if needed. Not sure how to load photos on this site.
Re: 2 piece clutch cover
Posted: Thu Sep 14, 2017 12:08 am
by Sandblaster
Reference this thread and email me the pics to
kxguru@bikerider.com
Re: 2 piece clutch cover
Posted: Thu Sep 14, 2017 2:05 am
by Bong 94
photos sent
Re: 2 piece clutch cover
Posted: Thu Sep 14, 2017 2:37 am
by Sandblaster
I want your clutch... lol
Talk to Alex Ward 208-249-7152
He can get it welded up to your specs...
Just be sure to let him know all the details
Re: 2 piece clutch cover
Posted: Sun Dec 17, 2017 6:43 pm
by Zerofear66
Who does the entire conversion for this clutch cover mod?
Re: 2 piece clutch cover
Posted: Mon Dec 18, 2017 1:18 am
by Sandblaster
At the moment none of us have the adapter rings I designed.
We should have some in the next few months.
East USA Talk to Alex Ward 208-249-7152
West USA Talk to Jason Tanner 541-653-5334
Canada or Non USA talk to Adam MIllar 204-823-0010